VirtuWall™ Pre-Pasted Wallcovering
Digitally Printable Wallcovering Paper

Tech Data Sheet

Physical Specifications
Adhesive
Color
Caliper facestock
Caliper facestock + adhesive
Release Liner
Adhesion to Steel*
Tensile
Elongation
Tear Resistance
Light Transmission [3mm thick]
Gloss (60 degree angle) 3.0
Chemical Resistance
Durability
Shelf Life** 1 year from date of purchase. Application instructions are supplied. Without third party professional installation application, warranty is not applicable.
Base 10 mil. Latex Saturated Paper
Flock
Resin
Coating
Finish Buckram (linen)
Caliper (basestock)
Basis Weight 123# (200 gsm)
L*
a*
b*
Opacity 94.6
Gloss (75 degree angle)
BEKK Smoothness
Taber Stiffness
Temperature Limit (F)
Temperature Limit (C)
Chemical Resistance (Water)
Chemical Resistance (10% Nacl)
Chemical Resistance (38% H2S04)
Chemical Resistance (Ethanol)
Chemical Resistance (Aceton)
Surface pH
Surface Energy
Availability 54"x150 ft. rolls
Features

Digitally printable - UV inkjet, latex and true solvent
Easy to remove
Buckram embossed pattern

Application Information

Transfer Tape

Availability

54"x150 ft. rolls

Applications

Murals
Wall decals and decor
Point-of-purchase displays


Printer Profiles

Printer profiles are available on rtape.com.


Warranty

Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.

RTape VirtuWall™ wall covering products are warranted at time of shipment to be free of defect in workmanship or materials as described in this technical data sheet. Prints must be applied in indoor environments per the process detailed in VirtuWall™ Installation Instructions to a well-prepared wall meaning that: The wall surface should be clean, dry, structurally sound and free of mildew, grease or other stains, and free of irregularities to achieve the best hanging performance and removal when redecorating. Manufacturer will replace or credit any material manufacturer deems defective. Manufacturer does not warrant that use of the products will achieve any particular result. No acceptance or responsibility for loss, damage, or expense, implied or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.