VinylEfx AIR
Printable Metallized Vinyl with Air Egress Technology

Tech Data Sheet

Physical Specifications
Adhesive Removable Acrylic PSA (1.0 mil/25 μm)
Color Fine Brush Silver, Matte Silver, Smooth Silver, Smooth Gold
Caliper facestock 3.0 mil. (75 μm)
Caliper facestock + adhesive 4.0 mil. (100 μm)
Release Liner Poly-coated embossed air-egress technology (162 gsm)
Adhesion to Steel* 20-30 oz/in 27N/100mm (24 oz.)
Tensile
Elongation
Tear Resistance
Light Transmission [3mm thick]
Gloss (60 degree angle)
Chemical Resistance
Durability Intended for indoor applications only (6 months)
Shelf Life** 1 year
Base
Flock
Resin
Coating
Finish
Caliper (basestock)
Basis Weight
L*
a*
b*
Opacity
Gloss (75 degree angle)
BEKK Smoothness
Taber Stiffness
Temperature Limit (F) -30F to 140F
Temperature Limit (C) -34C to 60C
Chemical Resistance (Water)
Chemical Resistance (10% Nacl)
Chemical Resistance (38% H2S04)
Chemical Resistance (Ethanol)
Chemical Resistance (Aceton)
Surface pH
Surface Energy
Availability 54"x10 yd. (137 cm. x 9.14 m.)
54"x50 yd. (137 cm. x 45.7 m.)
Features

Printable - solvent, ecosolvent, latex, UV curable and screen printing platforms
Excellent lay-flat characteristics and stability during cutting and weeding
Deep embossed vinyl facestock
New air egress technology
Proprietary, and more forgiving, removable adhesive
Compatible with liquid and film laminates

Application Information

Flat or simple curved surfaces
Minimum application temperature = 50F (10C)
Use of a heat gun is not advisable due to potential discoloration

Transfer Tape

Scratching of the film during application can be prevented by using one of our recommended application tapes (4075RLA, 4078RLA).

Availability

54"x10 yd. (137 cm. x 9.14 m.)
54"x50 yd. (137 cm. x 45.7 m.)

Applications

Point of purchase displays
Posters
Counter mats
Window graphics
Trade show displays and graphics


Printer Profiles

Printer profiles are available on rtape.com.


Warranty

Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.