ProGrade Paint Mask
Removable Vinyl Paintmask

RTape ProGrade™ paint mask is a polymeric-blend calendered vinyl film with a removable adhesive. This paint mask is specially-designed for making computer-cut stencils for painted graphics. ProGrade™ paint mask removes easily and cleanly from most OEM factory paint surfaces without leaving any adhesive residue or other surface contamination. For trouble-free results, remove ProGrade™ stencils immediately after painting and curing. ProGrade™ can withstand short-term high temperature bake cycles up to +200°F (+94°C). NOTE: Prior to production, test ProGrade™ paint mask for your specific application. Not suitable for wet application

Tech Data Sheet

Physical Specifications
Adhesive Acrylic
Color Yellow
Caliper facestock 80 microns (3.2 mils)
Caliper facestock + adhesive 105 microns (4.2 mils)
Release Liner 145 gsm (88# ) polycoated Kraft
Adhesion to Steel* stainless steel 1 minute dwell 22-26 oz./inch width
Tensile
Elongation
Tear Resistance
Light Transmission [3mm thick]
Gloss (60 degree angle)
Chemical Resistance
Durability
Shelf Life** 1 year
Base
Flock
Resin
Coating
Finish
Caliper (basestock)
Basis Weight
L*
a*
b*
Opacity
Gloss (75 degree angle)
BEKK Smoothness
Taber Stiffness
Temperature Limit (F)
Temperature Limit (C)
Chemical Resistance (Water)
Chemical Resistance (10% Nacl)
Chemical Resistance (38% H2S04)
Chemical Resistance (Ethanol)
Chemical Resistance (Aceton)
Surface pH
Surface Energy
Availability
Features

  • Easy to cut and weed fine detail.
  • Easy to transfer from the release liner. User-friendly handling characteristics ensure trouble-free application and removal.
  • Withstands short bake cycles up to +200°F (94°C).
  • Application Information

    Transfer Tape

    Availability

    Applications

  • Restaurant Menu Boards
  • Things-To-Do Lists
  • Writeable chalkboard for children's rooms, refrigerator doors or kitchen cabinets.

  • Printer Profiles

    Printer profiles are available on rtape.com.


    Warranty

    Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.