TRANSLUCENT BACKLIT POLYESTER
Tech Data Sheet
|Caliper facestock + adhesive|
|Adhesion to Steel*|
|Light Transmission [3mm thick]|
|Gloss (60 degree angle)||≤ 20|
|Basis Weight||280 g/m2|
|Opacity||70% ± 3|
|Gloss (75 degree angle)|
|Temperature Limit (F)|
|Temperature Limit (C)|
|Chemical Resistance (Water)|
|Chemical Resistance (10% Nacl)|
|Chemical Resistance (38% H2S04)|
|Chemical Resistance (Ethanol)|
|Chemical Resistance (Aceton)|
Translucent polyester base stock
Matte, water resistant, double layered coatings
PVC-free base material and coatings
High white point wide color gamut
Suitable printing condition: Temperature 15-30 0C (59-86 0F)/ Relative Humidity 30-60%.
Printing on translucent media is optimized when using an ICC printer profile. Profiles are available at rtape.com.
Lamination is optional. In order to protect image from physical damage and to decrease image fading, an over-laminate can be considered.
Indoor and outdoor backlit displays
Trade show graphics
Printer profiles are available on rtape.com.
Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.
One year from the date of purchase, with original packaging.