DigiMask™ Clear

DigiMask™ Clear features a specially-formulated 3.5 mil polypropylene film, which stays rigid during hot weather graphics applications to prevent stretching and misalignment of graphic panels. As a surface protection premask for large format digital prints the exceptional clarity of the film allows the end user inspect the print prior to acceptance of the job.

Tech Data Sheet

Physical Specifications
Adhesive Solventless
Color Clear Blue Tint
Caliper facestock 90 microns (3.2 mils)
Caliper facestock + adhesive 115 microns (4.5 mils)
Release Liner
Adhesion to Steel* 4.3 -7.7 N/100mm (4 - 7oz.)
Tensile 297-332 N/100mm (17 - 19 lb./in)
Elongation 650%
Tear Resistance
Light Transmission [3mm thick]
Gloss (60 degree angle)
Chemical Resistance
Durability
Shelf Life** 1 year
Base
Flock
Resin
Coating
Finish
Caliper (basestock)
Basis Weight
L*
a*
b*
Opacity
Gloss (75 degree angle)
BEKK Smoothness
Taber Stiffness
Temperature Limit (F)
Temperature Limit (C)
Chemical Resistance (Water)
Chemical Resistance (10% Nacl)
Chemical Resistance (38% H2S04)
Chemical Resistance (Ethanol)
Chemical Resistance (Aceton)
Surface pH
Surface Energy
Availability
Features

  • Specially-designed clear surface protection film aids application of full or partial vehicle wraps.
  • In hot weather applications, the rigid polypropylene film resists stretching to prevent misalignment of graphic panels during application.
  • Exceptional clarity allows quality inspections as well as aids registration of printed graphics panels during installation.
  • Unwinds easily for more user-friendly lamination.
  • Low tack adhesive removes easily without pulling overlaminates from the graphics or applied graphics from the substrate.
  • Factory cut rolls with perfectly cut edges.
  • Application Information

    Transfer Tape

    Availability

    Applications

  • Aids Application of Vehicle Wraps
  • Surface Protection Film for Wide Format Digital Prints.

  • Printer Profiles

    Printer profiles are available on rtape.com.


    Warranty

    Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.