Heavyweight Paper Application Tape
White translucent heavyweight saturated paper with ultra high tack rubber adhesive designed for very small lettering and graphics and hard-to-lift films. Exceptional resistance to abrasion and moisture.
Tech Data Sheet
|Caliper facestock||127- 140 microns (5-5.5mils)|
|Caliper facestock + adhesive||152 microns (6.0 mils)|
|Adhesion to Steel*||22+ N/100mm (20+oz.)|
|Tensile||332 N/100mm (19lb./in)|
|Light Transmission [3mm thick]|
|Gloss (60 degree angle)|
|Shelf Life**||1 year|
|Gloss (75 degree angle)|
|Temperature Limit (F)|
|Temperature Limit (C)|
|Chemical Resistance (Water)|
|Chemical Resistance (10% Nacl)|
|Chemical Resistance (38% H2S04)|
|Chemical Resistance (Ethanol)|
|Chemical Resistance (Aceton)|
* Adhesion PSTC-101, 1 min dwell on stainless steel
** Stored at 22 0C / 50-55% RH
Printer profiles are available on rtape.com.
Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.