Paper Application Tape with RLA®
4775RLA® Conform Series® premask consists of a premium grade, heavily saturated paper with mid-range adhesion. Designed to aid the transfer and installation of small and large graphics, 4775RLA® protects graphics printed with UV screen print inks and clear coats. Its medium tack rubber adhesive is specially formulated to flow into the peaks and valleys of the textured surface of four color prints. 4775RLA® features RLA® technology with improved adhesion to paper or film release liners.
Tech Data Sheet
|Caliper facestock||127 microns (5.0 mils)|
|Caliper facestock + adhesive||152 microns (6.0 mils)|
|Adhesion to Steel*||19 - 21 N/100mm (17 - 19oz.)|
|Tensile||332 N/100mm (19lb./in)|
|Light Transmission [3mm thick]|
|Gloss (60 degree angle)|
|Shelf Life**||1 year|
|Gloss (75 degree angle)|
|Temperature Limit (F)|
|Temperature Limit (C)|
|Chemical Resistance (Water)|
|Chemical Resistance (10% Nacl)|
|Chemical Resistance (38% H2S04)|
|Chemical Resistance (Ethanol)|
|Chemical Resistance (Aceton)|
* Adhesion PSTC-101, 1 min dwell on stainless steel
** Stored at 22 0C / 50-55% RH
Printer profiles are available on rtape.com.
Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.