Conform 4700LTRLA®
Paper Application Tape with RLA®

4700RLA® Conform Series® premask consists of a premium grade, heavily saturated paper with very low tack adhesion. The perfect choice for transferring plotter cut vinyl paint mask. 4700LTRLA® features RLA® technology with improved adhesion to paper or film release liners.

Tech Data Sheet

Physical Specifications
Adhesive Rubber-based
Color White/Translucent
Caliper facestock 127 microns (5.0 mils)
Caliper facestock + adhesive 152 microns (6.0 mils)
Release Liner
Adhesion to Steel* 9 -11 N/100mm (8 - 10oz.)
Tensile 332 N/100mm (19lb./in)
Elongation 12%
Tear Resistance 70-80
Light Transmission [3mm thick]
Gloss (60 degree angle)
Chemical Resistance
Durability
Shelf Life** 1 year
Base
Flock
Resin
Coating
Finish
Caliper (basestock)
Basis Weight
L*
a*
b*
Opacity
Gloss (75 degree angle)
BEKK Smoothness
Taber Stiffness
Temperature Limit (F)
Temperature Limit (C)
Chemical Resistance (Water)
Chemical Resistance (10% Nacl)
Chemical Resistance (38% H2S04)
Chemical Resistance (Ethanol)
Chemical Resistance (Aceton)
Surface pH
Surface Energy
Availability
Features

  • No adhesion build to store graphics. Extra-heavy weight facestock makes handling of large graphics easier.
  • Heavier paper is also less likely to tear during removal, so installations are completed with fewer delays.
  • Removes easily from applied graphics.
  • Conform® Release Liner Adhesion adheres well to release liners for superior lay flat preventing tunneling and edge curling of stacked or rolled graphics.
  • Application Information

    Transfer Tape

    Availability

    Applications

  • Use for application of vinyl paint mask stencils.
  • Premask for large vinyl graphics.
  • Applications over irregular surfaces, wet or dry.
  • Companion product to RTape ProGrade paint mask.

  • Printer Profiles

    Printer profiles are available on rtape.com.


    Warranty

    Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.