Heavyweight Paper Application Tape
White translucent heavyweight saturated paper with low/medium rubber adhesive. Heavier paper provides easier handling during application and moisture resistance for wet applications. Alternative for 3M Brand SCPM-19.
Tech Data Sheet
|Caliper facestock||127 microns (5.0 mils)|
|Caliper facestock + adhesive||152 microns (6.0 mils)|
|Adhesion to Steel*||10-12 N/100mm (9-11oz.)|
|Tensile||332 N/100mm (19lb./in)|
|Light Transmission [3mm thick]|
|Gloss (60 degree angle)|
|Shelf Life**||1 year|
|Gloss (75 degree angle)|
|Temperature Limit (F)|
|Temperature Limit (C)|
|Chemical Resistance (Water)|
|Chemical Resistance (10% Nacl)|
|Chemical Resistance (38% H2S04)|
|Chemical Resistance (Ethanol)|
|Chemical Resistance (Aceton)|
Will not lower high gloss printing due to flat even coating.
Printer profiles are available on rtape.com.
Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.