Paper Application Tape with RLA®
4075RLA® Conform Series® application tape is standard weight saturated paper coated with a high tack rubber adhesive designed specifically as a premasking of small and mid-sized die cut or prespaced vinyl and printed graphics. 4075RLA® features RLA® technology with improved adhesion to paper or film release liners.
Tech Data Sheet
|Caliper facestock||100-113 microns (4..0 -4.5 mils)|
|Caliper facestock + adhesive||125-138 microns (5.0 - 5.5 mils)|
|Adhesion to Steel*||18 - 20 N/100mm (16 - 18 oz.)|
|Tensile||297 N/100mm (17lb./in)|
|Light Transmission [3mm thick]|
|Gloss (60 degree angle)|
|Shelf Life**||1 year|
|Gloss (75 degree angle)|
|Temperature Limit (F)|
|Temperature Limit (C)|
|Chemical Resistance (Water)|
|Chemical Resistance (10% Nacl)|
|Chemical Resistance (38% H2S04)|
|Chemical Resistance (Ethanol)|
|Chemical Resistance (Aceton)|
Printer profiles are available on rtape.com.
Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.