Heavyweight Paper Application Tape
4000 is standard weight saturated paper coated with a very low tack rubber adhesive designed specifically as a protective masking of wide format digital graphics and large vinyl graphics.
Tech Data Sheet
|Caliper facestock||100-113 microns (4..0 -4.5 mils)|
|Caliper facestock + adhesive||125-138 microns (5.0 - 5.5 mils)|
|Adhesion to Steel*||7 - 9 N/100mm (6 - 8oz.)|
|Tensile||297 N/100mm (17lb./in)|
|Light Transmission [3mm thick]|
|Gloss (60 degree angle)|
|Shelf Life**||1 year|
|Gloss (75 degree angle)|
|Temperature Limit (F)|
|Temperature Limit (C)|
|Chemical Resistance (Water)|
|Chemical Resistance (10% Nacl)|
|Chemical Resistance (38% H2S04)|
|Chemical Resistance (Ethanol)|
|Chemical Resistance (Aceton)|
Printer profiles are available on rtape.com.
Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.