Eclypse 3 mil. PC-V
RTape's heavy gauge polycarbonate overlaminates are coated with a solvent-based adhesive on one side. Its high-performance adhesive improves the product's resistance to tunneling, crazing and stress whitening when graphics are rolled. Its heavier adhesive coating weight allows for better adhesive wet out resulting in blemish-free laminations. The unique adhesive formulation resists, yellowing, moisture and other adverse conditions.
Tech Data Sheet
|Caliper facestock||75 micron (3 mils)|
|Caliper facestock + adhesive||112.5 micron(4.5mils)|
|Release Liner||PET liner wi/6.5 gsm/in. release|
|Adhesion to Steel*||(71.9 oz/in)|
|Light Transmission [3mm thick]|
|Gloss (60 degree angle)||9 to 12|
|Shelf Life**||1 Year|
|Gloss (75 degree angle)|
|Temperature Limit (F)|
|Temperature Limit (C)|
|Chemical Resistance (Water)|
|Chemical Resistance (10% Nacl)|
|Chemical Resistance (38% H2S04)|
|Chemical Resistance (Ethanol)|
|Chemical Resistance (Aceton)|
Printer profiles are available on rtape.com.
Tapes are only warranted to be free of defect in workmanship or materials at time of shipment. Manufacturer will replace or credit any material manufacturer deems defective. No acceptance or responsibility for loss, damage, or expense, implies or otherwise, shall be assumed by seller or manufacturer. User assumes all risk and liability herewith.