Storing Application Tape


Application tape manufacturers package their products in plastic sleeves, then box them in corrugated containers to protect the tape from light, dirt and humidity. If you’re not going to use the tape immediately, keep it in its box. Tape not stored in boxes is exposed to light, which can cause yellowing. Even shop lighting can yellow application tape.

Stacking rolls of application are horizontally can cause a flat spot on the tape roll, making unwinding more difficult.


This yellowing occurs because the light begins to degrade the natural rubber adhesive. Although this degradation isn’t generally significant to adversely affect product performance, it’s aesthetically unpleasing.

Yellowing caused by light detracts from an application tape’s appearance. However, storing a pressure-sensitive product in an excessively hot environment is more harmful. Prolonged exposure to temperatures above 85°F prematurely ages an adhesive and degrades its performance. Years ago, I met one sign maker who kept his application tape in the refrigerator. Wonders never cease! My advice is to store your beer in the fridge, and keep your tape in your shop’s coolest area.

As tapes age, their performance often declines and becomes problematic. Old application tape can “block-up” on the roll — the adhesive binds to the facestock’s first surface, making the product difficult, and often impossible, to unwind. All pressure-sensitive products have warranted shelf lives; for application tape and premask, it’s six months.

Consequently, you should rotate your tape inventory. The material first entered into inventory should be used first. Furthermore, handle your application tape with care — damage to a roll’s ends impairs unwinding the tape. The paper easily tears where it’s damaged.

Finally, application tape rolls should be stacked upright. Stacking them horizontally causes a flat spot on the tape roll, making unwinding more difficult.

Related Articles







Blog Categories


Recent Posts

Whether you are installing trailer graphics or doing a full wrap of a car or van, surface preparation involves a three-step process of detergent washing, solvent cleaning and a final wipe down with IPA. Read more


Whether you are screen printing or painting, the coating must bond to the substrate for the service life of the product. Depending on the physical properties of the coating that you have selected for a project and the substrate to which the coating will be applied, the paint or ink adheres in a few different manners. Read more


Adhesion failures of pressure sensitive materials, such as labels, decorative films, foam tapes and graphic panels, to powder coated substrates are quite common. Just as there are several reasons for these failures, there are several steps that the fabricator can take to avoid these problems. Read more


View All