New VinylEfx Air with Air-Egress Technology




RTape Corp. introduces VInylEfx Air specifically for the growing printable specialty media market. VinylEfx Air is a metallized vinyl with air egress, bubble-free technology suitable for a variety of wide format graphic applications.

RTape's proprietary air-egress technology allows a novice installers to easily remove air bubbles from applications such as window graphics, point-of-purchase displays, posters and counter mats, and eliminates the need for wet applications. Its low tack acrylic adhesive removes cleanly from surfaces without the use of chemicals.

VinylEfx Air is printable using solvent, ecosolvent, latex, UV curable and screen-printing platforms. ICC printer profiles are can be found by clicking here.

VinylEfx Air is available in 54"x10 yd. and 54"x50 yd. wide format rolls in fine brush silver, matte silver, smooth silver and smooth gold decorative finishes. Custom roll sizes are available upon request.

To request a 54"x3 yd. sample roll in either of the four finishes mentioned above, please click here. For more information on VinylEfx Air, please call an RTape representative at (800) 440-1250 or email sales@rtape.com.


Blog Categories


Recent Posts

With the right film, the right application tools and the right techniques, vinyl graphics can be applied to textured wall surfaces such brick and concrete block. Many of old time decal applicators would heat a cast vinyl with an industrial heat gun, and burnish the hot, pliable film into the textured surface using a rivet brush for this job. Read more


The plethora of terms used for the application tapes sold in the sign and screen print markets could confuse anyone. In the sign market, many people just use the terms “application tape” or “application paper”. Frequently this tape is also incorrectly referred to as “transfer tape”.
If you are a purist and want to pick a few nits, the terms application tape and transfer tape refer to completely different products. Transfer tape refers to a transfer adhesive, which is an adhesive coated onto a release liner.

Read more


Many shops, which have printed wall murals in which the ink bleeds to the edge of the panel, have experienced edge curl issues with a variety of vinyl films. For permanent wall graphics applications, I would consider using Arlon’s DPF 8000 film. DPF 8000 is a 3.5 mil (90 micron) satin white calendered vinyl, designed for long term indoor and outdoor applications. It features an aggressive, permanent pressure-sensitive adhesive that sticks to those “hard-to-stick-to” surfaces.
Read more


View All