Changing Printer Setting in Roland Versaworks

To adjust the ink settings for printing on a particular vinyl, such as RTape VinylEfx® or EZ Erase™, you will need to create a custom profile and rename it. For printing on these RTape films I generally recommend using a standard profile for GCVP glossy calendered vinyl.

After opening Roland Versaworks, click on Media Explorer in the Media dropdown menu.

Next highlight the profile for GCVP glossy calendered vinyl.

Create a copy of the profile by either clicking on the Copy Media icon at the top of the window OR by right clicking and selecting Copy Media. Click OK.

Next right click the new profile and select Change Media Name.



To change the settings, double click on the new profile. In Printer Controls you can adjust the heat settings under Heater Controls. Recommended drying temperature for VinylEfx® and EZ Erase™ is 34°C. High heat can cause these rigid vinyls to expand on the release liner resulting in tunneling. After adjusting the heat setting, click OK.

After returning to the Media Explorer screen, you can adjust the Print Quality Settings by selecting the icon at the top of the screen on the far right.

In this screen you can change the print direction, head speed and feed speed. Recommended settings are Uni-direction Only with the Head Speed at 300mm/sec. After making your adjustments, click OK.



Next double click on the ink set for your printer, such as CMYK or CMYKMt. Next double click on the ink set for your printer, such as CMYK or CMYKMt.



In the new screen that appears, select Set Ink Limit. Then under Max Ink Limit adjust the percentage of Total Ink, for example 170%. Then click OK.



This article was written by Jim Hingst, Business Development Manager-Technology for RTape Corp. and posted on Hingst Sign Post.  


Blog Categories


Recent Posts

With the right film, the right application tools and the right techniques, vinyl graphics can be applied to textured wall surfaces such brick and concrete block. Many of old time decal applicators would heat a cast vinyl with an industrial heat gun, and burnish the hot, pliable film into the textured surface using a rivet brush for this job. Read more


The plethora of terms used for the application tapes sold in the sign and screen print markets could confuse anyone. In the sign market, many people just use the terms “application tape” or “application paper”. Frequently this tape is also incorrectly referred to as “transfer tape”.
If you are a purist and want to pick a few nits, the terms application tape and transfer tape refer to completely different products. Transfer tape refers to a transfer adhesive, which is an adhesive coated onto a release liner.

Read more


Many shops, which have printed wall murals in which the ink bleeds to the edge of the panel, have experienced edge curl issues with a variety of vinyl films. For permanent wall graphics applications, I would consider using Arlon’s DPF 8000 film. DPF 8000 is a 3.5 mil (90 micron) satin white calendered vinyl, designed for long term indoor and outdoor applications. It features an aggressive, permanent pressure-sensitive adhesive that sticks to those “hard-to-stick-to” surfaces.
Read more


View All